Questions and Answers Latest Topics

Limit of Shunt

Thu, 23 Apr 2015 16:01:59 +0000

I've placed this here as it is a question which Remagen prompted.

In the UK we have Limit of Shunt boards and in some cases now what look like Subsidiary/Shunt signals which are Fixed at Danger. These are used when Shunt Moves are signalled in the wrong direction and are normally placed before a shunt move would encroach on the overlap of the protecting signal (i.e. tell the driver where he must not proceed past during a shunt move).

Does something similar exist in Germany?

In my example of Remagen I am thinking of a shunt move from 004 to 041. How or what prevents the driver from occupying the overlap for F954 as the simulation appears to allow trains to approach this Signal when the example shunt move is underway.

Oberwinter

Sun, 12 Apr 2015 11:02:33 +0000

Does anybody know if the Station has Island Platforms?

Can Passenger trains call at 303 and 304 if they are running late and need to be overtaken by a faster service or are these lines just for Freight trains?

I've had a look in Wiki but it isn't explicit.

Thanks.

12601 RB Problems in Remagen

Wed, 18 Jul 2012 20:06:59 +0000

Timetable 2012

i had this train coming with +5 (Remagen normally arrive is at 6:47, departs 6:48 for Bonn) So, after route 955-002 i fix route 002-952. I noticed that with signal P002 open when train was entering in Remagen (switch 042 and 039) train had not stop in Remagen. In Train Overview train was announced with is normally duty (stops at Remagen) but train was already towards Oberwinter. Arrived at Oberwinter train dont make is stop. In timetable viewer no hours are reported in renagen and Oberwinter. Last stops is write for Bad Bodendorf.

The problem may be to open starting signal 002 when train is not at stops on platform 2 ?

thanks for the reply

Diego

Remagen problems with dispatcher supervisor

Wed, 21 Mar 2012 20:05:26 +0000

When trains coming from Remagen towards Andernach (right track) are after Sinzig (the last three block section after track 409 towards Brohl) the representation of trains is not correct (on dispatcher supervisor panel) and usually they lose their number or signals are red on dispatcher screen even if on main panel are green .

good evening

Diego

Remagen Bugs

Fri, 17 May 2013 08:03:19 +0000

Some times ago i wrote a thread about 3 bugs in remagen Stellwerke

The first was track 28 in Remagen station, when i try to lock it the result is ok but indication on panel for track 28 is off. The other was about missing stop for trains coming from branch line toward Oberwinter in track 2 (if i set exit route with entrance route train does not have a stop at platform) and the last a strange behaviour on Dispatcher supervisor for trains leaving Sinzing towards Brohl on right track (on last 2 block sections first the train is with number and red colour, after it disappears and track is set at green and after is red but without number on track.

Is there something "in progress" in next updates about this these "little" problems

Thanks for reply

Diego

a question for Nopileos

Wed, 23 May 2012 19:14:21 +0000

Please Nopileos, can you help me about my duty in Remagen simulation with trains 25400 series. Can you tell me the exact sequence of receiving, coupling and discoupling BR460 Desiro. I can uncouple train when it arrives but i have problems to give couple order for train that must start from Remagen

very thanks

Diego

For Nopileos

Sun, 06 May 2012 09:50:07 +0000

Hallo Nopileos. first thanks twice for your job to create timetable. Pheraps there is some error in timetable for train IC 2013 and MRB 25421. The IC has a longer stops at Remagen on track 003 and it seems it has a timetable that has some cobflicts after Oberwinter with the RB. Can you control please

have a good Sunday

Diego

Remagen little problem

Thu, 05 Apr 2012 20:04:40 +0000

Having received a train from Koblenz in track 2 at Remagen bahnof i would renumber it on panel (the timetable automatically had changed on Train overview the number from 4 7372 in 77372) but if i write with ZPN801 the number of my new train (an empty stock Remagen-Koblenz Hbf) the number dont appear on track 002 at Remagen but on block section 002 (in ZNP801 i write 77372 R 002 ZNS) , the last on my panel towards Brohl and not on gleis 2 in RE

Is this right ?

Good nigh and thanks in advance for the reply

Diego