I see that http://licensing.signalsimulation.com/verify.php? is called with name, email, key and id arguments. If I run that in Chrome, I get <License><Permission value="Allow" /></License>, so I suppose my license is OK.

Do you know whether KK needs specific ports to be opened? Or maybe some firewall permissions?

Thanks a lot,

-Yannick.

I start at 05.00 12th July.  On starting there are 2 trains parked in KK platforms - they have come from KKD (parking) and are heading back towards KOPL and KD at 05.10 - I 2214 and I 2445.  I wait for the 'Train Ready' signal and set the routes up towards 210 and 220 - the routes set OK and greens come.   But the trains never move.

I see in the Wiki that A230 and A220 are in the ZNP offering list - so i try that - offers accepted - route set - but still no move.  

Help appreciated as this is my first go with Koln.

i just got Stellwerk Simulator vol1 and having installed each of the four locations that come on the cd - Koeln however doesnt work - clicking on the shortcut to run it brings up hte message that it cannot be run on windows

- is there any kind of fix or update for this for windows 10?

How do I amend movement orders within the Bbf as they seem more complicated than ordinary movement orders?

Regards,

Phil.

Signal 005 does not clear.

I try to edit the movement instructions to re-enter Schlundgleis but Schlundgleis will not illuminate as an option to select.

I try to edit the movement instructions to send 76408 to Bbf R5 or R3 but this doesn't work either.

I am left with 76408 fouling routes from Track 5 and Track 6.

Any help would be most welcome, and I have a saved sim file if that would be of assistance.

Regards,

Phil.

Description is there is the preceding berth but is lost when the train steps forward.

Is this a known issue?

I have a saved file if that helps at all.

For example I got asked to grant a possession on Track 660 with reference being made to Signal 266. I can find Track 660 but can't see any Signal Numbers on the Generic Panel View.

Might it not be better to restrict these requests to areas under control of the main panel and/or the link track to a neighbour?

While I've used them successfully with my keyboard I haven't been able to replicate them by pressing the buttons on the keyboard entry window on the simulation itself.

I have been able to use the keyboard entry window to set and clear cover signals as well as set routes to them but not both at the same time as per the steps below.

or even faster, for the same examples as given above:

• Set 014 to Stop, set route from 315 to 014 : enter 315014 + [arrow down] + [arrow left] + [ENTER]
• Set 095 to Stop, set route from 240 to 095 : enter 240095 + [arrow down] + [arrow right] + [ENTER]

Also noted that if you clear the cover signals and then delay clearing the Platform Exit signal that the train will not move until the latter signal is cleared.

On this basis is there any reason not to clear the cover signal once a train has come to a stand in the section of Platform you have assigned it?

What happens in real life? This might be a rhetorical question as the answer might be as per manual.

A few minutes later at 1100hrs I have train 1-703 ready to go to the Bbf. It is booked onto track Bbf 72 but train 2-76289 is already there as it has not disappeared after being sent to the Bbf at 1029hrs. When I offer train

1-703 to the Bbf supervisor he accepts it via track 357, but it is not possible to get from track 357 to track Bbf 72. Has anyone else had the Bbf supervisor accept trains via a track from where it is not possible to get to the booked stabling track?

Regards,

Phil.

I've had this problem for a while now. I've played from 00:00 (signalbox time) to 01:00 without any problems. Suddenly I got a phone from an angry train driver, telling me he has been standing at signal 173 for 8 minutes now. I set the route from 173 to 163, hoping it was just a one-off. Then he calls me again, telling me he's been waiting at signal 163 for 5 minutes.

I have no idea what's wrong. I've tried to deactivate and activate the fleeting several times now, but it doesn't work. This have happened before, and then I had to restart the simulator. Now it happened again, and I don't really want to restart the simulator every hour.

Is there anything I'm doing wrong? Is there something I have forgot to do?

I can set routes from signal to signal using the keyboard without any problem, but despite following the Wiki instructions to the letter the cover signal keyboard commands will not work for me in either sim.

Have any other users experienced similar issues? Any help would be appreciated.

Regards,

Phil.

My new PC runs Windows 8.1 ; I've tried setting up my licensed version of Köln Hbf (the only setup files I have here are v.2.3.0.44, and I was hoping that the Update tool would upgrade me to a more recent version), but the application just does not start: when I double click on the app icon, I immediately get the "Zentrallstellwerk Köln Hbf stopped working" error in Windows. I have tried running the application under various compatibility modes (such as Windows 7 and Windows XP SP3), to no avail.

Am I the only one with such an issue?

Thanks - Yannick.

Diego

I have seen in some other forum postings :

Hansaring 1 = Gleis 122
Hansaring 2 = Gleis 123

eg: http://www.signalsoft.info/forum/index.php?showtopic=961

However, the Platform Overview (Bahnsteigübersicht) seems to indicate '1' and '2' the other way around.

Best regards,

Steven.

Timetable PSB Cologne Central Station

Please note that this timetable file can only be used when you have a valid licence key.

good night

Diego

When choosing operate catenary manually when i select manage catenary controls in game all I get is one circuit being "AsdTEst" which won't do anything.

Also wondering if the timetable was ever updated?

Running Version 3.0.0.25

I've just updated to v.2.3.0.60 (Sept. 15th 2011) of Zentralstellwerk Köln Hbf., and there seems to be a bug I haven't noticed on the previous version.

Steps to repro: Start a new simulation any time; create a route from signal P123 to track 141 in Hansaring.

Expected result: The route is created and signal P123 opens to Hp Clear + Vr Caution.

Actual result: The route is created and signal P123 flashes between Hp Danger and Hp Clear + Vr Caution. A train on track 123 won't proceed.

Or is it just me? Or is it something I don't quite clearly understand in German signals?

Cheers - Yannick.

It is available here: http://signalsimulation.com/zoom/koeln/

You will need Cologne version 2.3.0.20 (or newer) in order to use the new multiplayer system. The other simulations (Post T Amsterdam, Bonn Hbf, Andernach, etc.) will continue to use Post T MultiPlayer version 2 until new plugins are made available that are compatible with version 3. This means that Post T MultiPlayer 3 installs to a separate directory, so version 2 is not affected.

There are some known issues that we will address later:

• The S-Bahn signal automation lights do not yet work
  
• The special end buttons near BBF may not work exactly as expected.
  

I hope everyone has fun!

Here's a picture out of the dev studio. We're not in Betastatus at the moment. But just to show how it can look like...

http://www.signalsimulation.com/pictures/KK.jpg